Tritech Super ZipJet – ROV Dredge Pump – Suction & Jetting

The Tritech Super ZipJet ROV Dredge Pump replaces the successful Tritech ZipJet Ultra range of suction & jetting systems.

 

Description

The Super ZipJet pump incorporates many technical advances over the previous generation of ROV suction and jetting systems. These advances are a direct result of customer feedback.
Considerable emphasis has been placed on increasing the pumps efficiency in both the suction and jetting modes. The Super ZipJet pump incorporates several design features which improve its reliability and substantially reduce its maintenance costs.

The Super ZipJet pump will not block or jam because there are no moving parts on the dredging side of the system. Power is derived from a stream of high velocity fluid creating a low pressure region behind the suction nozzle. The pump may be rapidly switched from suction to jetting mode.

Technical information

Hydraulic Motor Input
Pressure: 150 to 220 Bar (2200 to 3200 psi)
Flow: 40 to 60 litres per minute (11 to 16 USgpm)

Actuator
Minimum pressure: 110 Bar (1595 psi)
Maximum pressure: 240 Bar (3480 psi)

Hydraulic Fittings
Motor A & B: No. 12 JIC male
Motor case drain: No. 6 JIC male
Actuator connection: No. 4 JIC male

Check Valve
Normal: Tritech Volvo Protector Assembly
Alternative: Integrated Hydraulics FPR-1/22-0.5 (cracking pressure 0.5 bar)

Output
Jetting performance: 1000 litres per minute @ 2 Bar (270 USgpm)
Suction flow: 500 – 1000 litres per minute (135 to 270 USgpm)
Solids removal rate: 5 – 10 tonnes per hour (184 – 368 lb per minute)

Hose Dimensions (internal diameter)
Jetting performance: 1000 litres per minute @ 2 Bar (270 USgpm)
Suction flow: 500 – 1000 litres per minute (135 to 270 USgpm)
Solids removal rate: 5 – 10 tonnes per hour (184 – 368 lb per minute)

Weight and Materials
Weight in air: 25kg (55lb)
Weight in water: 11kg (24lb)
Materials: Nylacast, UHMWPE

Datasheet

rov-dredge-pump-super-zipjet Datasheet

rov-dredge-pump-super-zipjet_hardware_manual