Innova Matrix Mk II+

The Matrix is a stand-alone fibre optic multiplexer and control solution, providing a simple, plug and play interface for a large array of sensors and equipment to any remotely operated system.

Enquiry

Description

The system consists of a compact, one-atmospheric subsea unit rated for 3000 MSW, and a 19”
rack mounted topside unit with touch screen and status for all channels on the screen.

The Matrix’s internal control system provides individual 2-pole
switching of all power outputs as well
as DC power insulation monitoring. The DC power outputs are equipped with software re settable
fuses to save operation time. All DC power outputs are equipped with voltage and current monitoring,
which is also displayed in the topside controller.

Technical information

Topside:
• 7 inch Linux based touch screen interface for control and diagnostics
• Status for all channels on screen
• Voltage and current monitoring
• Alarm / warning logging
• Operational hours logged
• Web browser based interface for mirrored control
• Ethernet connection for control
• 19” 3U rack mount

Power input:
• Subsea: 47-63 Hz, 85-264 VAC / 120-370 VDC
• Topside: 90-265 VAC, 47-63Hz

Power output:
• 2 x 48 VDC/24 VDC noise attenuated 6A – Software switchable
• 1 x 48 VDC 3A/24V, 6A for 2x100Mbps Ethernet – Fixed output. Hardware switchable
• 10 x 24 VDC 2A outputs 2-pole relay
• 1 x 110 VAC 2-pole relay output
• Software resettable fuses on DC power output
• 1200 W available DC power

Signal interface:
• 9 x RS232
• 4 x software switchable RS232/RS485
• 3 x 100 Mbps Ethernet
• 2 x Gb Ethernet
• 2 x single direction PECL
• 3 x HD-SDI
• 2 x 5V TTL trigger
• All serial and trigger interfaces are isolated

Mechanical properties:
• Aluminium 6082-T6, hard anodized or Titanium Grade 5
• Dimensions: D 230mm (223mm) L 600mm
• Depth rating: 3000 MSW
• Shock and vibration: According to ISO 13628-6

Other:
• Water ingress detection
• Two-stage noise attenuation filter on power input
• Humidity sensor subsea, trending available in software
• Temperature sensor topside and subsea
• DC ground fault detection system
• Fibre and SFP diagnostics
• Control board diagnostics

Connectors:
• C1: Seacon 5506-2021-E PECL, Gbps Ethernet, 24/48 VDC, RS232, Sync with C2
• C2: Seacon 5506-2021-E PECL, Gbps Ethernet, 24/48 VDC, RS232, Sync with C1
• C3: Seacon 5506-2021-E TTL 5V, 2 x 100 Mbps Ethernet, RS232/RS485, 24VDC/48VDC
• C4: Seacon MINL-5515-75 Ω Camera 1 (HD-SDI) RS232, 24 VDC
• C5: Seacon MINL-5515-75 Ω Camera 2 (HD-SDI) RS232, 24 VDC
• C6: Seacon MINL-5515-75 Ω Camera 3 (HD-SDI) RS232, 24 VDC
• C7: Seacon MCBH8FS RS232, 24 VDC
• C8: Seacon MCBH8FS RS232, 24 VDC
• C9: Seacon MCBH8FS Ethernet, TTL, 24 VDC
• C10: Seacon MCBH8FS TTL 5V, RS232, 24 VDC
• C11: Seacon MCBH8FS RS232/RS485, 24 VDC
• C12: Seacon MCBH6FS RS232, 110 VAC (depending on voltage supplied to the Matrix)
• C13: Seacon MCBH8FS RS232/RS485, 24 VDC
• C14: Seacon MCBH8FS RS232/RS485, 24 VDC
• Fibre: Seacon OPT-G4-SM Topside<->Subsea Comms
• Power: Seacon 5506-2006 47-63 Hz, 85-264 VAC / 120-370 VDC

Datasheet

INNOVA_MATRIX_Mk_II+_datablad