Teledyne Bowtech LED-CL Chamber Light
The light has 100,000 hour life and has been designed specifically for use within the Hyperbaric Diving environment, whether that is in Hyperbaric Chambers, TUP’s, Diving Bells or even Wet Bells.
Description
The Teledyne Bowtech LED-CL Chamber Light is extremely safe and reliable, due to its advanced technology and innovation.
The light has 100,000 hour life and has been designed specifically for use within the Hyperbaric Diving environment, whether that is in Hyperbaric Chambers, TUP’s, Diving Bells or even Wet Bells.
The lights are available in Dry or Wet options, which are then fitted with a helium relief valve to ensure the safe egress of gas, which may migrate through the sealing faces during compression, eliminating any potentially explosive hazard when decompressed.
The lights run very cool compared with conventional lights of an equivalent output; due to the use of highly efficient, bright LED clusters. They produce at least double the lumen output which removes the need for a heavy heat sink.
In chambers, the light is populated with a White and Red LED cluster to allow them to be remotely switched from white light for the waking hours and red light during resting hours. In bunk applications, an extended bezel is fitted to provide a focused beam. Either lamp can be fitted with an on/off switch.
Key Features:
– High lumen output
– Low temperature operation
– Long life, 100,000 hours approx
– 70 bar pressure rated aluminium housing
Technical information
| | Chamber Light | Bunk Light | |
| Electrical | Input Power Requirement | 24Vdc or 270mA | 24Vdc or 370mA (per circuit) |
| Optical | Typical Luminous Flux | 200 lumens white, 200 lumens red | 200 lumens white, 200 lumens red |
| Typical Colour Temperature | 6,600 Kelvin (white) | 6,600 Kelvin (options available) | |
| Red Wavelength | 630nm | 630nm | |
| Lumen Maintenance (70%) | 50,000 hours | 50,000 hours | |
| Window/Lens | Acrylic | Acrylic | |
| Environmental | Housing Material | Hard anodised 6082-T6 aluminium | |
| Design Pressure | 70 bar (with o-rings and helium relief valve fitted) | ||
| Mechanical | Weight in Air | 0.6kg (1.32lbs) | 0.7kg (1.55lbs) |
| Beam Angle | 75° | 65° | |
| Length | 65mm | 87mm | |
| Diameter | 67mm (front-end), 100mm base) | ||
| Lamp Type | Teledyne Bowtech LED array (6 white LEDs) | Teledyne Bowtech LED array (6 white/6 red) | |
| Mounts | 2 of M6 mounting holes on 84mm PCD | ||
| Standard Connector | MCBH3M | ||
| Optional Connectors | Large selection of connectors available | ||