CUTE Series
Cute Insulation Measurement Board
The insulation measurement board will measure the insulation resistance between a low voltage DC (24VDC) powered system and protective earth. Measurement is done by a low current DC signal, in principle as an Ohm-meter. The insulation board can be supplied with 1 or 2 channels for measurement of up to 2 separate (galvanic isolated) powered systems. The output is voltage corresponds to the leakage resistance between the DC powered system and protective earth.
Datasheet
--------------------------------------------------------------------------------
Cute I/O Controller Board
The I/O controller board is designed to provide a number of I/O’s often required in subsea intervention control systems.
The board has 12 analogue inputs, 4 configured for 0-20mA input and 8 configured for 0-10V input. Other combinations of current / voltage inputs can be accomplished by altering resistor values on the board. The unit has also 8 opto isolated digital inputs, relay drivers for 8 external relays, 8 onboard relays (typically for controlling power to sensors) and water alarm
Remote control is possible via RS232 or multi drop RS485 communication.
Datasheet
--------------------------------------------------------------------------------
Cute Camera Controller Board
The camera controller board is designed to provide necessary functionality to control 4 cameras and lights used in subsea intervention systems.
The board has analogue outputs for light control, controllable power outputs for camera power, motor driver outputs suitable for camera functions (Zoom/Focus) and water alarm input. It is also fitted with a 4 to 1 video multiplexer and drivers for controlling 4 external relays (typically light relays). The camera power outputs are fitted with electronic resettable fuses. Relays are provided for camera outputs (power and zoom/focus) to be able to isolate the outputs in case of water leakage in external camera cables.
Remote control is possible via RS232 or multi drop RS484 communication. Several units can be controlled over a single RS485 network.
Datasheet
--------------------------------------------------------------------------------
Cute Communication Distribution BoardThe communication distribution board connects galvanic isolated RS485 networks together and makes them accessible to a master. Communication to master system can be either RS232 or RS485.
Datasheet